9 REASONS WHY THE DOORLEC R-99 IS YOUR BEST DOOR OPERATOR INVESTMENT
1. Simpler to Install & Assemble:
Doorlec model R-99 is the ultimate garage door opener with all the features you expect and more. It offers security, by locking door when closed and the convenience of automatic opening. No printed circuits or solid state components. So reliable our model R-99 operator, that it will operate in below zero temperature or high humidity conditions. The pre-assembled trolley with a new and unique coupling system utilizes only three nuts, to totally assemble the Doorlec model R-99 door opener, saving you time and effort. In a short period of time and with a few tools, a layman will be able to install and have the Doorlec model R-99 garage door opener working.
2. Motor:
The motor is a powerful 1/3 H.P. 120 volt, single phase, with large 48 frame, permanently lubricated high-speed bearings for longer life, and has a high-efficiency operation rating of “continuous duty”. Built into the operator is an external manual overload relay for overcurrent and under voltage protection. It can be manually reset without the removal of the enclosure.
3. Full Chain Drive:
High quality No. 65 roller chain will lift the heaviest residential door without fear of breaking.
4. Instant Reverse Obstruction Safety System:
Should door meet an obstruction when travelling towards the “CLOSE” position, the load sensing device built into the operator, will automatically reverse door to a fully “OPEN” position. If the push button, key switch or radio control is activated while door is closing, it will instantly reverse door and go back to a fully “OPEN” position. Should ice and snow accumulate on the garage floor (up to 2″), the garage door will close and stay closed.
5. Courtesy Light:
The full body length twin lighting system lights up a wide area when door opens or closes and stays on for three (3) minutes. Built-in time delay will automatically shut off lights.
6. Exterior Key Switch:
Heavy all steel construction electric key switch can be used to open and close garage door, if radio control transmitter is not available.
Radio Control:
Consists of a radio receiver mounted on the operator’s radio terminal inside the garage and one or more hand-held transmitters. Digital coding permits you to select your own private “Electric key code”. You can change this code at any time, simply by setting the dip switch to a new position on both receiver and transmitter.
Interior wall push button supplied with each operator. (Key switch, radio control optional at extra cost).
7. Open and Close Adjustments:
Easily accessible, by simply removing one light lens, and using your fingers, you can now adjust door travel in both directions, by turning the open & close adjustment knobs left or right.
8. Rugged all Gavanized Steel Construction:
Doorlec’s model R-99 garage door opener utilizes all steel construction for greater strength and durability, all moving parts are made from high-quality steel. Galvanized means absolutely no “RUST” for years of worry free operation.
9. Shock Absorbing Lifting Arm:
Permanently attached to sliding carriage, it rides on high-tensile steel “T” bar. From floor level, a tug on a pull cord will detach arm from drive and allow manual operation in case of emergency such as power failure. To engage door with drive system, simply pull cord again, then activate operator with key switch, wall push button or radio control and the door will automatically travel either to “OPEN” or “CLOSE” position.
In addition for those high-torque starts, forceful closing of door, this arm is fitted with a shock absorbing spring to give longer life to both door and operator.
9 REASONS WHY THE DOORLEC R-99 IS YOUR BEST DOOR OPERATOR INVESTMENT
1. Simpler to Install & Assemble:
Doorlec model R-99 is the ultimate garage door opener with all the features you expect and more. It offers security, by locking door when closed and the convenience of automatic opening. No printed circuits or solid state components. So reliable our model R-99 operator, that it will operate in below zero temperature or high humidity conditions. The pre-assembled trolley with a new and unique coupling system utilizes only three nuts, to totally assemble the Doorlec model R-99 door opener, saving you time and effort. In a short period of time and with a few tools, a layman will be able to install and have the Doorlec model R-99 garage door opener working.
2. Motor:
The motor is a powerful 1/3 H.P. 120 volt, single phase, with large 48 frame, permanently lubricated high-speed bearings for longer life, and has a high-efficiency operation rating of “continuous duty”. Built into the operator is an external manual overload relay for overcurrent and under voltage protection. It can be manually reset without the removal of the enclosure.
3. Full Chain Drive:
High quality No. 65 roller chain will lift the heaviest residential door without fear of breaking.
4. Instant Reverse Obstruction Safety System:
Should door meet an obstruction when travelling towards the “CLOSE” position, the load sensing device built into the operator, will automatically reverse door to a fully “OPEN” position. If the push button, key switch or radio control is activated while door is closing, it will instantly reverse door and go back to a fully “OPEN” position. Should ice and snow accumulate on the garage floor (up to 2″), the garage door will close and stay closed.
5. Courtesy Light:
The full body length twin lighting system lights up a wide area when door opens or closes and stays on for three (3) minutes. Built-in time delay will automatically shut off lights.
6. Exterior Key Switch:
Heavy all steel construction electric key switch can be used to open and close garage door, if radio control transmitter is not available.
Radio Control:
Consists of a radio receiver mounted on the operator’s radio terminal inside the garage and one or more hand-held transmitters. Digital coding permits you to select your own private “Electric key code”. You can change this code at any time, simply by setting the dip switch to a new position on both receiver and transmitter.
Interior wall push button supplied with each operator. (Key switch, radio control optional at extra cost).
7. Open and Close Adjustments:
Easily accessible, by simply removing one light lens, and using your fingers, you can now adjust door travel in both directions, by turning the open & close adjustment knobs left or right.
8. Rugged all Gavanized Steel Construction:
Doorlec’s model R-99 garage door opener utilizes all steel construction for greater strength and durability, all moving parts are made from high-quality steel. Galvanized means absolutely no “RUST” for years of worry free operation.
9. Shock Absorbing Lifting Arm:
Permanently attached to sliding carriage, it rides on high-tensile steel “T” bar. From floor level, a tug on a pull cord will detach arm from drive and allow manual operation in case of emergency such as power failure. To engage door with drive system, simply pull cord again, then activate operator with key switch, wall push button or radio control and the door will automatically travel either to “OPEN” or “CLOSE” position.
In addition for those high-torque starts, forceful closing of door, this arm is fitted with a shock absorbing spring to give longer life to both door and operator.
Leader in door and gate operator