Residential
Electric Door and Gate Operators

Commercial-Industrial
Trolley type-ceilling, Wall Mounts, B1-Parting, Sliding Doors Electric Operators

Waterproof
Trolley Type-Ceillling and Jack-Shaft-Wall Mount

Explosion-proof
Trolley Type-Ceillling and Jack-Shaft-Wall Mount

Sliding Gate
Electric Operators

Swing Gate
Electric Operators

Trafic control barriers
To control of vehicular traffic in private and public parking areas.

Rolling &Fire Doors
Rolling Service Doors & Fire Doors. Jack Shaft - Wall Mount

Accessories
Different accessories for your needs

Safety Devices
Reverse Systems and Sensor

Entry-Exit Devices
Loop Detectors, Card Reader and more

Operating Controls
 

Modifications
 

Special applications
 
 

Photo-Electric Controls Modulated L.E.D

APPLICATION:
For safety reasons when an automatic closing TIMER is used on any upward acting door or gate, a photoelectric control system is recommended. These photoelectric controls, positioned close to the door/gate, project a modulated light-beam across the driveway path. If the beam should be interrupted while door/gate is closing, it will cause the door/gate to reverse instantaneously and return to the fully open position. Should the light beam be interrupted while the door/gate is open, the automatic closing "TIMER" will reset and remain inactive to keep door/gate open until the light beam is restored and free from obstruction. In most applications, the photoelectric control is used as a safety device. When door is in the fully-closed position, sensor is inoperative preventing unwanted use of door/gate. This photoelectric control system can also be used as an operating device to open the door/gate.

1. RETRO-REFECTIVE TYPE:
Consists of one self-contained waterproof enclosure, with an invisible, solid state L.E.D. light source, modulated for indoor and outdoor application, non-responsive to ambient light. One reflector and mounting bracket is provided. Operating voltage: 24V to 240V A.C. Operating light indicator. Maximum sensing distance: 30 ft. (9m). Part No. 50010

2. THRU-BEAM TYPE:
Consists of two self-contained waterproof enclosures, one receiver, and one transmitter with an invisible solid-state L.E.D. light source modulated for indoor application only. Operating voltage: 24V to 240V A.C. Mounting brackets provided. Operating light indicator. Maximum sensing distance: 50 ft. (15.2m).

Part No. 50015